Plasson Compression Flange Adaptor with Metal Backing Flange – Metric PE Pipe

The Plasson Compression Flange Adaptor with Metal Backing Flangeconnects metric PE poly pipe to flanged fittings and equipment. One end grips the polypipe using compression. The other end is a steel backing flange drilled to ISO boltpatterns. This fitting could suit pump stations, tank connections, and flanged pipelinework on the farm.

Pipe sizes in this range go from 40mm through to 125mm. Flange sizes run from DN40up to DN150. The fitting body is polypropylene with an NBR seal. These are rated to PN16and tested to ISO 17885 for water use.

Features

• Compression end for a firm grip on metric PE poly pipe
• Steel metal backing flange drilled to ISO bolt patterns
• Pipe sizes from 40mm to 125mm
• Flange sizes from DN40 to DN150
• Polypropylene body with NBR seal
• Rated to PN16
• Tested to ISO 17885 for water use

These adaptors may suit farm pump stations, tank installations, and other large flangedpipe connections.