Galvanised Malleable Iron 90 Elbow Female/Female | BSP Thread | 3/4″ to 4″

The Galvanised Malleable Iron 90 Female/Female Elbow is a sturdy right-angle fitting used to change direction in a pipe run. Made from malleable cast iron to ASTM A-197 and ASTM A47, it has a hot-dip galvanised finish to EN 10242 to help it stand up to outdoor and rural conditions. Female BSP threads on both ends make it a neat fit into most standard pipe systems.

These elbows are well suited to farm irrigation lines, water supply runs, compressed air systems, and fuel or gas line work. The ISO 1 BSP thread cuts a pressure-tight joint each time, and every fitting complies with Australian Standards. Sizes run from 3/4 inch (LE20) through to 4 inch (LE94) to cover a wide range of pipe work needs.

Features

• Malleable cast iron body to ASTM A-197 and ASTM A47 for solid, lasting strength
• Hot-dip galvanised finish to EN 10242 for good rust and corrosion resistance
• Female-to-female BSP thread to ISO 1 for a pressure-tight joint on both ends
• 90 degree angle for clean direction changes in pipe runs
• Rated to 150PSI working pressure
• Suits water, compressed air, irrigation, and fuel or gas line use
• Complies with Australian Standards

Handy for tight corners in irrigation and water supply lines, this elbow could help you route pipe work neatly around sheds, tanks, and troughs.