The California Bander Tool by InoSol is an easy-to-use device designed for effective livestock castration procedures. This tool works with specially designed pre-assembled bands to make the process simple and efficient for professional use.

The California Bander Tool provides a reliable method for livestock management with proper technique and supervision. This professional-grade tool ensures consistent results when used correctly with the appropriate bands and veterinary guidance.

Features

• Easy-to-use device for effective castration procedures
• Works with specially designed pre-assembled bands
• Simple and efficient process for livestock management
• Professional-grade tool for consistent results
• Designed for use under veterinary supervision
• Reliable method for proper livestock care
• Essential tool for farm animal management

Watch the video below to see the bander in action.

Procedure Instructions

The California Bander is a simple and easy way to castrate. Tool and bands are sold separately. The bands come pre-assembled and are easy to use. Before you start try rolling up a towel to simulate a scrotal sack. Practice a few times to get a feel for the tool and the bands.

This tool should be used under the supervision of a veterinarian.

1. Begin by slipping the left hand into the tool. With the right hand, place the clip of the band into the slot of the tool.
2. Hold the free end of the band between the first and second fingers of the left hand. This will help the clip stay steady while you stretch the band.
3. Grasp the scrotal sac and hold the tool firmly against it. Tip: Roll up a towel to simulate a scrotal sac and practice a few times to get a feel for the tool and the bands.
4. With your right hand, reach around the scrotal sac and grab the free end of the rubber tubing.
5. Stretch the band downward and away from yourself with about 7 to 8 kgs of pull or until there is no more free stretch.
6. Pull the stretched band around the scrotal sac. Lock the band into the clip by pulling the stretched band down the center slot all the way to the bottom.
7. When the clip is down, pull the band to the right corner of the “T” slot on the clip to lock it. Tip: Be sure to keep the band fully stretched as you pull it around, since you cannot tighten it once it is locked in the clip.
8. Release the clip from the tool by slightly tipping it backward. This will leave the band with the clip attached to the scrotal sac.
9. The rubber tube does not need to come off. If you can fit your finger between the band and the scrotal sac, the band is not tight enough.
10. Ensure loops are stored outside of direct sunlight and temperature changes.

Perfect for livestock professionals who need reliable castration tools for proper animal management under veterinary supervision.

*California Bands 25 pack sold separately and must be purchased in addition to the bander tool for complete operation.