Plasson Adjustable Electrofusion Elbow Fittings, 90mm to 250mm PE Pipe

Not every bend in polyethylene piping fits neatly into a right angle. The Plasson Adjustable Elbow allows you to set the required angle on-site. This fitting operates as an electrofusion joint, cleanly welding to the PE pipe. It is used by farmers, irrigation installers, and contractors where a fixed-angle elbow simply wont fit.

This elbow is made from PE100 material and is rated PN16 for water use. Sizes ranging from 90 mm to 250 mm are suitable for pipes with an SDR rating of 17 or better. Plasson designs and tests these fittings according to international standards, such as EN 12201 and AS/NZS 4129. Every size features a two-part body, which allows the bend angle to be adjusted before welding.

Features

• Adjustable design allows on-site setting of the elbow angle, available in sizes from 90 mm to 250 mm
• Made from PE100 material for long-term strength in water and irrigation lines
• PN16 rating for reliable pressure handling in most farm water systems
• Suitable for pipes with an SDR rating of 17 or better, in all sizes
• Tested to international standards, including EN 12201 and AS/NZS 4129
• Two-part body design allows adjustment before performing electrofusion welding
• Available in eight sizes, from 90 mm to 250 mm, to meet various pipeline requirements

This adjustable elbow may be suitable for polyethylene pipelines where a flexible bending solution is needed on-site.