Plasson Male Transition Coupler – Electrofusion PE to BSPT Thread – 8 Sizes

These Plasson PE Male Transition Couplers connect PE pipe to male threadedfittings. The electrofusion end bonds to PE pipe using heat. The other end carries a male BSPTthread. These fittings could suit farm water systems, rural supply lines, and irrigationsetups.

Eight size options are available, covering pipe from 25mm to 63mm. Thread sizes run from3/4″ through to 2″. The fittings are made from PE100 material and rated to PN16. Anelectrofusion controller is required to complete the pipe weld.

Features

• Eight size combinations, from PE 25 x 3/4″ to PE 63 x 2″
• Electrofusion end for a strong, heat-welded bond to PE pipe
• Male BSPT threaded end
• Made from PE100 material
• Rated to PN16
• Tested to AS/NZS 4129 for water use
• Requires an electrofusion controller for installation

Useful wherever a PE pipe run meets a threaded valve or fitting on the property.