An Si02 rich, purified ceramic coating for paint surfaces that delivers unparalleled gloss, water behaviour, and micro scratch resistance.

For use by accredited detailers only

The 9h hardness coating protects paintwork from uv rays, harmful chemicals, and weathering.

As a result of the coatings purity, users will experience a noticeable increase in paint clarity.

This product can be layered if required to achieve increased protection and gloss

How to Apply

To use the product follow the steps outlined below.

• Clean, prepare and correct the paintwork, ensuring the removal of all contamination.
• Ensure all surfaces are cool to touch and degreased using autobead surface prep.
• Apply the coating to one panel at a time using the supplied applicator block and suede applicator cloth.
• Apply the coating in a cross hatch pattern with the final movement in the direction of which the air flows over the vehicle.
• Allow the coating to bond to the paint surface for between 45 seconds and 2 minutes before removing the residue with a clean, dry microfibre towel.
• Buff using a buffing towel to a high gloss finish.
• Cure for approximately 20 mins at around 60c/140f using infra-red paint curing lamps.
• If curing lamps are unavailable, allow 12 hours for a full cure.